RWC5020x_FW_V1.321_20210510

RWC5020A/B/M Firmware Release V1.321 May 10 2021

[LoRaWAN]

1. 

[Pre-Certification]

2. In EU Cert 5.7, the Failure information message was not correct for not sending LinkChekReq. It is fixed to show correct information as “DUT didn’t send LinkCheckReq”.

[RF Performance]

3. In EDT or GWT mode, the AGC function cannot detect the saturated input power. It is fixed to automatically change the RX gain by detecting the saturation condition.

[NST]

4. 

[Link Analyzer]

5. 

RWC5020A/B/M Firmware Release V1.320 Apr 30 2021

[LoRaWAN]

1. Protocol version parameter is separated from LoRaWAN1.0.3 to LoRaWAN1.0.2 and LoRaWAN1.0.3 to support different features for the two versions.

2. Added IL917 regional parameters for Israel.

[Pre-Certification]

3. Added Pre-certification for All regions for LoRaWAN 1.0.4.​

[RF Performance]

4. LoRaWAN 1.0.4 no longer supports test mode MAC command, so the RF performance scenario only supports normal mode for LoRaWAN 1.0.4. The Certi_Echo and Certi_DL_Count modes are removed.

5. The average number parameter of the frequency counter has been added.

[NST]

6. RF AGC ON/OFF parameter has been added to the NST RX and MFG modes.

[Link Analyzer]

7. Since LoRaWAN 1.0.4 no longer supports Test mode MAC commands, those MAC commands are removed from Link Analyzer's list of MAC commands.